Type 35mm focal-plane shutter multi-mode AF SLR camera

Picture Size 24×36 mm, panorama (13x36mm) enabled (Japanese version only)

Normal Lens EF 28-80mm f/3.5-5.6 II USM, others

Lens Mount EF mount

AF System TTL phase detection. AF modes: One-Shot AF/AI Servo AF (automatic switchover). Multi-BASIS for the AF sensor. (automatic selection of 3 focusing points). Center focusing point selectable manually with AE lock button. AF operating range at ISO 100: EV 1.5 – 18.

Shutter Vertical-travel, focal-plane electronic shutter. 30 sec. – 1/2000 sec., B. X-sync at 1/90 sec. (hot shoe). Built-in electronic self-timer (with beeper).

Viewfinder Fixed eye-level roof mirror. 0.7x magnification and 90% coverage.

Viewfinder Information

Center AF mark, wide AF frame, partial metering circle. 7-segment LCD displays numeric values, textual display, in-focus indicator, exposure display, shutter speed, aperture setting, red-eye reduction lamp, flash ready, panorama frame (set with external lever), and other indications.

Metering & Exposure Control

Composite SPC for TTL full-aperture metering (6-zone evaluative, 9.5% partial at center, and center-weighted averaging) with shutter speed-priority AE, aperture-priority AE, Intelligent program AE, depth-of-field AE, four program AE modes, and metered manual. Exposure compensation range of ±2 EV (in 1/2-stop increments). Metering range at ISO 100 and f/1.4: EV 2 – 20. Film speed range: ISO 6 to 6400. Maximum 9 multiple exposures.

External LCD

Shutter speed, aperture setting, film speed, multiple exposure count, red-eye reduction, self-timer display, film status, exposure display, battery check, and other indications.

Built-in Flash Located on pentaprism hump. Auto pop-up head. TTL autoflash control (fires automatically in backlight and low-light conditions). Off-the-film metering with a 4-zone flash metering sensor covering three flash metering points. Red-eye reduction lamp (AF-assist beam emitter) provided. Guide No. 12 (at ISO 100 in m).

Power Source Two 3 V CR123A lithium batteries

Film Loading & Advance

Align film leader at mark, then close the camera back for prewind loading. First, the entire roll is wound on the take-up spool. Then each time a picture is taken, the film advances back into the cartridge. Film transport with the built-in motor. Film advance speed: 3 fps and single advance.

Film Rewind After the last frame is exposed, the film is rewound automatically.

Dimensions & Weight 145 x 92 x 62 mm, 370 g

Condition: Recondition/Refurbished: This item has been inspected, tested, and reconditioned to factory specifications by an authorized Canon refurbisher